Please do not disconnect your device during the process. This will kick off the process to flash the ROM. All other checkboxes should be unchecked.Īfter selecting the appropriate files, click on “Start” button in Odin.Make sure that you do not mess up with checkboxes: Skip any files that you did not find in the package. Click on CSC button and select the file with CSC in its name.Click on Phone button and select the file that has MODEM in its name.Click on PDA button, then browse and select the file that has CODE / PDA in its name.If the firmware package had multiple files: If the firmware zip package had just one file, click on PDA button, then browse and select the firmware file (.tar or. If you do see the message, it means that your device was detected successfully by Odin and you can now flash any firmware files onto your device using Odin.
#CAN YOU INSTALL ROM USING ODIN DRIVERS#
Important: If you do not see the port number in any of ID:COM boxes or if the box does not turn yellow, please do not proceed and check if the USB drivers are installed correctly and the device is connected via USB. When your device is connected, one of Odin ID:COM boxes will turn yellow and display the COM port number. Once it is in download mode, connect your device to the computer via USB cable.
#CAN YOU INSTALL ROM USING ODIN ANDROID#
Press & hold Power + Home + Volume down buttons till you see a triangle and Android robot.For most Samsung devices, you will need to do this: Step 4:īoot your device in download mode. Right click on Odin3 v3.12.3.exe and run it as administrator to start Odin. If you get multiple files , there will be separate files for PDA, Phone & CSC.ĭownload Odin3 v3.12.3.zip and extract the downloaded zip file.If you get one file , it will have everything inside it: PDA + Phone + CSC.After extracting, you will either get one. Step 1:ĭownload the official firmware zip package for your device. We will not be responsible for any hard done to your device. Note: Installing official firmware / stock ROM does not involve much risks most of the time. Task 5: Make sure that Samsung Kies is not running. Task 4: USB Debugging should be enabled on your device. Ideally, the battery level should be around 60-80%.
Task 3: Make sure that your device is well charged. Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage. You can download and install Samsung Kies which will automatically install device drivers. Task 1: Install USB drivers for your device on your PC.
0 kommentar(er)
